Understanding Bandwidth

Hello again everybody!

I felt it was about time to dust off the blog and give it a go. I think I should start a series on the essentials of networking and what you should know about it, to make an informed decision about what to buy, etc.

This could get very technical, so try to follow along as I take you through all this.

How do I know this: Years in college and hands-on experience working I.T. in my local area. I've seen the effects of everything I'll be discussing.

When deciding on a network type, you really have to start with, what will I be doing with the network. For many, the answer is easy, I want to get on the internet; for others, the answer is a bit more complicated.

When talking about speed, it's important to note that there are two major measurements of indicating speed, they're closely related but give very different numbers. Think about it like temperature, Celsius and Fahrenheit, if the temperature goes up, both will rise, if it goes down, they both will fall, but not necessarily at the same speed, or to the same numbers, or by the same amounts.
These two are in bits per second (bps) and Bytes per second (Bps)

Confused yet? you should be.
The way this works is that a bit is a single 1 or 0 in a computer system; a byte is a set of 8 bits that contains information, one value of a possible 255. Why the strange numbers? because a bit has two options, either be a 1, or a 0. which means that if you want 3 options, you need to use two bits, but two bits gives you 4 options, one of which is simply invalid. but what if you want 5 options? you need 3 bits, but three bits means you have 8 options (000, 001, 010, 011, 100, 101, 110, 111), 3 of which will simply be invalid. It's because of this (factoring by 2), which is why we see the same numbers cropping up with computers a lot.

2, 4, 8, 16, 32, 64, 128...

so what happens when bps meets Bps?

well, the speed in bps, is much higher in number than the speed in Bps.

For simplicity, lets use a value very close to the national average, that divides nicely, so it's easy to follow: 16. a majority of internet connections in north america are running at aproximately 16 megabits per second. that means, at any given second, 16,000,000 bits can travel across your internet link. sound like a lot? it used to be.
Truth is, 16,000,000 bits is only 2MB (megabytes in this case)

I want to point something out before moving further. the difference between bits and bytes is supposed to be indicated by the use of capital or lower case lettering. eg. 16 megabits per second is supposed to be indicated with 16 mbps (with a capital on the M being optional), and 16 megabytes per second is supposed to be indicated with 16 mBps (again, capital on the M is optional). the capital "B" indicates bytes, where the lower-case "b" indicates bits. Unfortunately, not everyone (especially marketing departments) understand this; so we get ISPs selling 16MBPS speeds, which is actually in bits.

so, with an average connection speed of 16mbps, that means we get 2MBps (16/8, because there's 8 bits per byte)

This trend of using bits per second, penetrates the telecom world. whenever dealing with communication speeds between two points, whether they are connected by ethernet, wireless, fiber optics, or a string with two cans, generally, we use bits per second. The problem with this, of course, is that everyone else uses bytes per second.

Example: in windows, all file transfer dialogs are in bytes per second, not bits. This means if you have a 16mbps line to the internet and download something, windows will show your speed (given that you're using the entire thing for just this download) as 2MBps. This has caused (in the past) a lot of confusion about what actual speed consumers are getting and what they should expect to get.
one of the most common misconceptions I've seen with internet is "I pay for 10mb service, but I can only download at 1.2mbps" - that's about what you should expect from 10mb service...

Bandwidth is a crazy thing too, since we have USB 2.0 which, in theory, runs at 480mbps, and the fastest I've seen it transfer has been about 200mbps (aproximately 25MBps) - what they don't tell you is that some of these connection types require overhead, USB more than most. Ethernet is actually rather slim on it's overhead, running about 40 bytes of overhead per packet (1500bytes or so): about 2.5% overhead. obviously it's much higher with USB.

So how much bandwidth do you need? depends on what you're doing. For an example, let's talk about HD video. If, by chance, you wanted to stream full-frame HD video from a blu-ray disk to a computer across a network, you would need to be able to sustain a minimum transfer speed, which is the same or greater than the amount of data per second in the blu-ray video files. Luckily, the specifications for these formats are published: first some facts from the specs.

BluRay disks when playing video, have a defined maximum bitrate of 54mbit/s - so, for example, if you wanted to send the bluray to a media player on wireless, you're going to have a bad time, depending on the wifi.

I say that because of duplexing. Full-Duplex is when you have a dedicated line of communication to/from a source, Half-Duplex is when you have to share a send/receive channel. Think of this like trying to shout over someone: nobody can understand either of you, so one person can talk at a time - this is half-duplex. If you have a direct line to someone's ear, and they have a direct line to yours, you and they can both talk, hearing only the other's voice, which makes more sense.

okay, so the example broke down at the end, give me a break. :)

so wireless, by nature (since you're only using one channel) is half-duplex, meaning the theoretical 54mbps on Wireless G (802.11g) is shared amongst send and receive, which would be fine, if you didn't have to send confirmations that you received information, and requests for more. This means your real-bandwidth on wireless will be significantly less than the 54mbps as advertised. This is the reason behind Wireless N being recommended for 'streaming' media.

wired networking could definitely handle it, transferring, on average, 100mbps in full-duplex mode. This far out performs the 54mbps coming off the blu-ray, and stutter-free playback should be possible... provided the rest of the network is fairly quiet.


Bandwidth is a topic that seems to confuse many people, here I'm talking about bandwidth in your house, and I hope that clears things up for you and yours. Soon I'll have discussions more in-depth about why wireless bandwidth isn't nearly what it should be, moreso than just being half-duplex. why we don't have full-duplex wireless, as well as internet bandwidth (why so slow). All this among many other topics to help clarify your digital life.

Be safe, enjoy.